Let us help you design your office fronts and provide all specs related to your project.

Enter »
Klein

Rollglass

Rollglass Office Fronts
 
Integrating the sliding door and fixed side-lite glass panels within the same track enhances aesthetic, acoustics and ease of installation. The top track can be surface mounted or recessed for cleaner more aesthetic design approach. A short 90º glass panel return between offices can be applied to avoid breaking the rhythm of the glass panels and the loss of transparency.
 
This configuration (fixed-fixed-fixed-sliding) allows you to get half of the opening with a fixed glass panel and the other half with the slider to get an optimum clear opening. A “self-closing” feature can be applied for the door to close by itself with 8 different speed settings. The door can also be placed in a “hold open” position as well. It is usually supplied for openings from 10’-0” to 16’-0”, but our tracks can be butt-jointed to continually run an entire hallway. The glass panels can be up to 10’-0” high, but our tracks can be butt-jointed to continually run an entire hallway. No floor track is required at the passageway, only under the fixed panels. An overlap of 2 3/8” between the fixed and the sliding panels will be applied to assist in noise reduction. The system is available in clear anodized aluminum finish.

Enter the following information to provide you detailed drawings of your application